Cement Testing Equipment

• Equipment Type
• Cement Testing Equipments

• Accuracy
• 1%

• Application
• Strength, consistency, fineness, setting time, and soundness testing

• Automation Grade
• Semi-Automatic/Automatic

• Capacity
• Up to 100 kN

• Color
• Multi

• Control Mode
• Manual/Automatic

• Display Type
• Digital / Analog

• Features
• Corrosion resistant, heavy-duty, precise measurements

• Frequency
• 50 Hz

• Gas Pressure
• 0.5-1.5 MPa (if applicable)

• Hardness
• HRC 55-60 (steel components)

• Humidity
• Relative humidity 50% 5%

• Interface Type
• RS232 / USB (optional)

• Machine Weight
• Approx. 50-80 kg (varies by model)

• Material
• Steel

• Max Height
• Up to 250 mm (for some models)

• Measuring Range
• Adjustable, depends on accessory

• Mounting Type
• Bench-top

• Number of Specimens
• Single/Multiple (based on attachment)

• Operating Voltage
• 220 V

• Port Size
• Standard 1/4 inch NPT

• Power Supply
• 220-240V AC, 50 Hz

• Product Type
• Cement Testing Equipments

• Resolution
• 0.1 N

• Response Time
• <2 seconds

• Specimen Size
• 40 x 40 x 160 mm (standard cube/mortar bar)

• Temperature
• 10C to 35C

• Test Range
• Up to 1000 N

• Test Speed
• 12 mm/min

• Test Stroke
• Up to 60 mm

• Test Width
• 32 mm (for standard specimens)

• Usage
• Industrial

• Equipment Type
• DETERMINATION OF RESISTANCE TO ABRASION AS PER IS 17190-2020

• Accuracy
• 1 cycle

• Application
• Industrial

• Automation Grade
• Automatic

• Capacity
• 2 stations

• Control Mode
• Automatic

• Display Type
• Digital

• Features
• Corrosion resistant

• Frequency
• 50 Hz

• Gas Pressure
• 0.5-0.8 MPa

• Hardness
• 5662 HRC

• Humidity
• 20%80% RH

• Interface Type
• Touch panel

• Machine Weight
• 40 Kg

• Material
• stainless steel

• Max Height
• 450 mm

• Measuring Range
• up to 99999 cycles

• Mounting Type
• Bench-top

• Number of Specimens
• 2

• Operating Voltage
• 220-240 V

• Port Size
• 1/4 inch

• Power Supply
• 220-240V, 50Hz

• Product Type
• DETERMINATION OF RESISTANCE TO ABRASION AS PER IS 17190-2020

• Resolution
• 1 cycle

• Response Time
• Immediate

• Specimen Size
• 25 mm x 25 mm

• Temperature
• 10C35C

• Test Range
• 099999 cycles

• Test Speed
• 60 cycles/min

• Test Stroke
• 35 mm

• Test Width
• 25 mm

• Usage
• laboratory

• Voltage
• 220-240 Volt (v)

• Equipment Type
• Wet Sieving Apparatus

• Accuracy
• 1%

• Application
• Used for determining the fineness of fly ash

• Automation Grade
• Manual

• Capacity
• 1 test per cycle

• Control Mode
• Manual Switch Operation

• Dimension (L*W*H)
• 9 x 10 x 19 Millimeter (mm)

• Display Type
• Not Applicable (no digital display)

• Features
• Rugged MS body, corrosion-resistant, water-tight sieve assembly

• Frequency
• 50 Hz

• Hardness
• MS construction (standard hardness)

• Humidity
• Relative Humidity up to 90%

• Interface Type
• Manual

• Machine Weight
• Approx. 10-14 kg

• Max Height
• 19 inch (as per overall dimension)

• Measuring Range
• Up to IS: 1727 Specification

• Mounting Type
• Bench Type

• Number of Specimens
• Single at a time

• Operating Voltage
• 230 V AC

• Port Size
• Standard sieve size 75 micron/45 micron sieve

• Power Supply
• 230 V AC, 50 Hz

• Product Type
• Wet Sieving Apparatus

• Resolution
• 0.01 g on digital balance (if provided)

• Response Time
• Immediate (manual visual assessment)

• Specimen Size
• 50 g approx. (standard as per IS)

• Temperature
• 5C to 45C Operating Range

• Test Range
• Fineness of Fly Ash as per IS: 1727

• Test Speed
• Standard 2800 rpm (motor speed)

• Test Stroke
• Continuous

• Usage
• Cement Testing Equipment

• Equipment Type
• Flow Table Motorised

• Accuracy
• 1 mm

• Application
• Flow test for cement and mortar

• Automation Grade
• Semi-automatic

• Capacity
• Suitable for standard cement tests

• Control Mode
• Motorised automatic operation

• Dimension (L*W*H)
• 150 X 360 X 270 (L X W X D) mm Millimeter (mm)

• Display Type
• Analog/dial

• Features
• Corrosion-resistant tabletop, non-slip base, automatic count

• Frequency
• 50 Hz

• Hardness
• Hardened tabletop for long life

• Humidity
• Up to 80% RH, non-condensing

• Interface Type
• Manual push-button start

• Machine Weight
• 20 kg (approx.)

• Max Height
• 270 mm

• Measuring Range
• Conforms to IS/BS/ASTM standards

• Mounting Type
• Bench-top

• Number of Specimens
• One per operation

• Operating Voltage
• 230 V AC

• Power Supply
• 230 V AC, 50 Hz, single phase

• Product Type
• Flow Table Motorized for Cement

• Resolution
• 1 mm

• Response Time
• Immediate/direct

• Specimen Size
• 100 mm cone (as per standards)

• Temperature
• 5C to 40C

• Test Range
• Standard cement flow tests

• Test Speed
• 15 drops in 15 seconds

• Test Stroke
• 12.5 mm drop height

• Test Width
• 250 mm diameter

• Usage
• Cement Testing Equipment

• Equipment Type
• Water Retention Test Apparatus

• Accuracy
• 1%

• Application
• To determine water retention value of cement mortar, masonry, and plaster

• Automation Grade
• Manual

• Capacity
• 100 ml test liquid

• Control Mode
• Manual Control

• Display Type
• Analog/Graduated Cylinder

• Features
• Corrosion resistant, robust body, easy to operate

• Frequency
• 50 Hz

• Gas Pressure
• 0.20.3 MPa (23 bar)

• Hardness
• Material-specific (SS/Brass/Aluminum)

• Humidity
• 40-70% RH

• Interface Type
• Manual

• Machine Weight
• Approximately 12 kg

• Max Height
• 350 mm

• Measuring Range
• 0100% water retention

• Mounting Type
• Bench-top

• Number of Specimens
• 1

• Operating Voltage
• 230 V AC, 50 Hz

• Port Size
• 6 mm inlet

• Power Supply
• 230 V AC, 50 Hz

• Resolution
• 0.1%

• Response Time
• Immediate upon filtration

• Specimen Size
• 140 140 mm

• Temperature
• 1530C

• Test Range
• 0100% water retention

• Test Speed
• Standard/manual

• Test Stroke
• Adjustable, up to 200 mm

• Test Width
• 150 mm

• Usage
• Laboratory, testing of mortar/plaster/cement

• Equipment Type
• Automatic Compression/Flexural Testing Machine

• Accuracy
• 1% of indicated load

• Application
• Compression and flexural strength testing of concrete specimens

• Automation Grade
• Fully Automatic

• Capacity
• 1000 kN, 2000 kN, 3000 kN

• Control Mode
• Automatic / PLC Controlled

• Display Type
• Digital LCD / Touch Screen

• Features
• Overload protection, Data storage, Auto-calibration

• Frequency
• 50 Hz

• Hardness
• Machine frame surface hardened

• Humidity
• Up to 90% RH (non-condensing)

• Interface Type
• USB/Ethernet (for data transfer)

• Machine Weight
• Approx. 350 kg

• Max Height
• 400 mm (specimen limit)

• Measuring Range
• 0100% of machine capacity

• Mounting Type
• Floor Mounted

• Number of Specimens
• 1 per cycle

• Operating Voltage
• 220-240 V, 50 Hz

• Port Size
• Standard as per IS/ASTM specifications

• Power Supply
• 220240 V, 50 Hz, Single Phase

• Resolution
• 0.1 kN

• Response Time
• <1 second

• Specimen Size
• Cubes: 150x150x150 mm, Cylinders: 150x300 mm, Prisms: 100x100x500 mm

• Temperature
• Ambient to 40C

• Test Range
• Up to 3000 kN (as per model)

• Test Speed
• 0.01 9.99 mm/min (variable)

• Test Stroke
• Up to 100 mm

• Test Width
• 150 mm

• Usage
• Laboratory / Industrial

• Voltage
• 220-240 Volt (v)

• Equipment Type
• Vicat Needle Apparatus for Gypsum

• Accuracy
• 1 mm on graduated scale

• Application
• Is used to determine the volume of water required for mixing Gypsum Plaster When performing the setting time and compressive strength test.

• Automation Grade
• Manual

• Capacity
• Holds single plunger/needle assembly

• Control Mode
• Manual

• Dimension (L*W*H)
• 120 X 180 X 320 (L X W X D) mm Millimeter (mm)

• Display Type
• Scale with pointer/manual graduation

• Features
• Supplied complete with a dashpot, Vicat mould, initial/final setting needles, glass plate, plunger, graduated scale

• Frequency
• Not Applicable (manual device)

• Hardness
• Not Specified for Apparatus (needles as per IS standards)

• Humidity
• Relative humidity as per standard test conditions

• Interface Type
• Manual/mechanical

• Machine Weight
• Approx. 3 kg

• Max Height
• 320 mm (Apparatus height)

• Measuring Range
• 0 50 mm (vertical scale)

• Mounting Type
• Table top/bench mounted

• Number of Specimens
• Single specimen at a time (using one Vicat mould)

• Operating Voltage
• Not Applicable (manual)

• Power Supply
• Not required (manual apparatus)

• Product Type
• Vicat Needle Apparatus for Gypsum Test

• Resolution
• 1 mm

• Response Time
• Immediate/manual

• Specimen Size
• Diameter 40 mm x Height 80 mm (as per IS:2542 Part-1 SectionIII)

• Temperature
• Ambient/Test Laboratory Conditions (27 2C recommended for gypsum)

• Test Range
• Initial and final setting time determination

• Test Speed
• Manual Operation

• Test Stroke
• Adjustable by vertical movement of the rod

• Test Width
• Standard Vicat Mould (40 mm internal diameter, 80 mm high)

• Usage
• Cement Testing Equipment

• Equipment Type
• Mechanical Test Jig

• Accuracy
• Depends on master machine

• Application
• This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 2 or 50mm mortar cement cube specimen

• Automation Grade
• Manual

• Capacity
• Compatible with compression machines up to 2000 kN

• Control Mode
• Manual

• Dimension (L*W*H)
• 205 X 205 X 250 (L X W X D) mm Millimeter (mm)

• Display Type
• Compression frame not included Display on main tester

• Features
• Rugged steel body, precision alignment, simple operation, re-usable

• Hardness
• High Grade Hardened Steel

• Humidity
• Ambient

• Interface Type
• Mechanical Mount

• Machine Weight
• Approx. 12 kg

• Max Height
• 250 mm overall

• Measuring Range
• Depends on compression testing machine

• Mounting Type
• Fits standard cement compression frames

• Number of Specimens
• Single Specimen

• Port Size
• N/A (No fluid connection)

• Power Supply
• Not Required (Mechanical Jig)

• Product Type
• Compression Frame Jig Assembly

• Resolution
• Based on compression machine

• Response Time
• Immediate/manual

• Specimen Size
• 40 x 40 x 160 mm cement prism; 50 mm cube with adapter

• Temperature
• Room Temperature

• Test Range
• Up to failure of standard cement prism and cubes

• Test Speed
• Manual Loading (Dependent on Compression Machine)

• Test Stroke
• Up to 160 mm specimen length

• Test Width
• 205 mm

• Usage
• For Cement Testing

• Equipment Type
• Testing Apparatus

• Accuracy
• 1 mm

• Application
• Setting time and consistency test for cement

• Automation Grade
• Manual

• Capacity
• Single specimen

• Control Mode
• Manual

• Display Type
• Graduated analog scale

• Features
• Removable Vicat needle, graduated scale, base plate, mould

• Humidity
• Ambient or according to standard test requirement

• Interface Type
• Manual

• Machine Weight
• 3 Kilograms (kg)

• Max Height
• Approx. 200 mm (overall) including stand and moving rod

• Measuring Range
• 0-50 mm penetration scale

• Mounting Type
• Benchtop

• Number of Specimens
• 1 at a time

• Operating Voltage
• Not applicable (manual)

• Power Supply
• Not required (manual)

• Product Type
• Vicat Needle Apparatus

• Resolution
• 1 mm graduation on scale

• Response Time
• Immediate/manual observation

• Specimen Size
• 80 mm diameter x 40 mm height (standard Vicat mould)

• Temperature
• Ambient or according to test standard

• Test Range
• 0-50 mm penetration

• Test Speed
• Manual operation (not motor driven)

• Test Stroke
• Adjustable, normally up to 50 mm

• Test Width
• Standard mould diameter: 80 mm

• Usage
• Cement Testing Equipment

• Weight
• 3 Kilograms (kg)

• Equipment Type
• Heat Of Hydration Apparatus

• Accuracy
• 0.5C

• Application
• Used to determine the heat of hydration of low heat Portland and hydraulic cement

• Automation Grade
• Manual

• Capacity
• 500 ml flask capacity

• Control Mode
• Manual

• Dimension (L*W*H)
• 12 x 12 x 29 (L x W x H) Millimeter (mm)

• Display Type
• Digital/Mercury Thermometer

• Features
• Copper calorimeter, outer jacket, insulated body, precise temperature measurement, corrosion resistant

• Frequency
• 50 Hz

• Gas Pressure
• Atmospheric

• Humidity
• 50-60% RH recommended

• Interface Type
• Analog (thermometric reading)

• Machine Weight
• Approx. 18 kg

• Max Height
• 29 cm (as per dimension)

• Measuring Range
• Up to 60C rise (typical for cement tests)

• Mounting Type
• Bench top

• Number of Specimens
• 1 per test cycle

• Operating Voltage
• 230 V

• Power Supply
• 230 V AC, 50 Hz

• Product Type
• Heat of Hydration Apparatus

• Resolution
• 0.1C (mercury in glass thermometer)

• Response Time
• Within 2 minutes (thermal equilibrium)

• Specimen Size
• 450 gm cement with 0.5 water-cement ratio, as per standard

• Temperature
• Ambient to 27C 2C (water bath control)

• Test Range
• Suitable for low heat Portland and hydraulic cement

• Test Speed
• Manual operation, not specified

• Usage
• Cement Testing Equipment

• Voltage
• 230 Volt (v)

• Accuracy
• 0.5%

• Application
• ASSEMBLY OF APPARATUS FOR DETERMINATION OF CARBONATE IN LIME

• Automation Grade
• Manual

• Capacity
• 100 ml Reaction Flask

• Control Mode
• Manual

• Display Type
• Visual (Burette Scale)

• Features
• Leak-proof Joints, Easy Assembly, Resistant to Acids

• Gas Pressure
• Atmospheric

• Hardness
• Borosilicate Glassware

• Humidity
• Ambient

• Interface Type
• Glass Tubing and Fittings

• Machine Weight
• Approx. 2.5 kg

• Max Height
• 250 mm

• Measuring Range
• 0-100% Carbonate

• Mounting Type
• Table Top

• Number of Specimens
• Single Sample per Test

• Operating Voltage
• N/A (Manual)

• Port Size
• Standard Glass Connectors (10 mm & 15 mm)

• Power Supply
• Not Required (Manual)

• Product Type
• Cement Testing

• Resolution
• 0.01%

• Response Time
• Immediate

• Specimen Size
• Powdered sample, 1-2 grams

• Temperature
• Ambient, 15-40C

• Test Range
• Up to 100% carbonate content in sample

• Test Speed
• Manual Operation

• Test Stroke
• Fixed, Up to 200 mm

• Test Width
• 100 mm

• Usage
• Determination of Carbonate content in Lime and Cement

• Equipment Type
• Flexural Testing Jig

• Accuracy
• 1% (dependent on UTM/compression machine)

• Application
• The compression/UTM Machine shall be capable enough to exert 50 N/S loading rate for accurate results as per above listed EN Standards.

• Automation Grade
• Manual

• Capacity
• Up to 150 kN

• Control Mode
• Manual operation

• Dimension (L*W*H)
• 205 X 205 X 250 (L X W X D) mm Millimeter (mm)

• Display Type
• Depends on UTM/compression machine

• Features
• Universal compatible with UTM/compression machines, heavy-duty steel construction

• Hardness
• High grade steel, HRC 60-62

• Humidity
• Ambient

• Interface Type
• Mechanical/Physical

• Machine Weight
• Approx. 8 Kg

• Max Height
• 250 mm

• Measuring Range
• 0 - 150 kN (machine-dependent)

• Mounting Type
• Placed on compression/UTM machines

• Number of Specimens
• Single specimen at a time

• Port Size
• Compatible with standard Compression/UTM machine platens

• Power Supply
• Not required (Manual jig)

• Product Type
• Cement Mortar Flexural Testing Jig

• Resolution
• 0.01 kN (machine-dependent)

• Response Time
• Immediate (manual jig)

• Specimen Size
• 40 mm x 40 mm x 160 mm

• Temperature
• Ambient

• Test Range
• 0 - 150 kN (dependent on applied UTM/Compression machine)

• Test Speed
• 50 N/s loading rate

• Test Stroke
• 100 mm

• Test Width
• 40 mm

• Usage
• For Cement Testing

• Equipment Type
• Lime Reactivity Cabinet

• Accuracy
• 1% of reading

• Application
• Testing reactivity of hydrated lime as per IS 6932

• Automation Grade
• Semi-automatic

• Capacity
• 1 unit per test

• Control Mode
• Digital Timer Control

• Display Type
• Digital LED display

• Features
• Digital timer, Stainless steel construction, In-built temperature control

• Frequency
• 50 Hz

• Gas Pressure
• Adjustable, up to 2 kg/cm

• Interface Type
• Manual with digital interface

• Machine Weight
• Approx. 45 Kg

• Max Height
• 400 mm

• Measuring Range
• Standard (as per IS specifications)

• Mounting Type
• Benchtop

• Number of Specimens
• One at a time

• Operating Voltage
• 230 V AC

• Port Size
• 1/4 inch

• Power Supply
• 230 V, 50 Hz, Single Phase

• Resolution
• 0.1C (temperature), 0.1 min (time)

• Response Time
• Instantaneous (for display)

• Specimen Size
• 40 mm diameter, 10 g sample

• Temperature
• Ambient to 100C (controlled)

• Test Range
• Standard as per IS 6932

• Test Speed
• Standard as per IS:6932(PART-V)1973

• Test Stroke
• 100 mm

• Test Width
• 150 mm

• Usage
• Laboratory reactivity test

• Equipment Type
• Length Comparator

• Accuracy
• 0.001 mm

• Application
• Precision length comparison and calibration

• Automation Grade
• Semi-Automatic

• Capacity
• 300 mm

• Control Mode
• Digital

• Display Type
• Digital LCD

• Features
• High accuracy, portable, easy calibration

• Frequency
• 50 Hz

• Humidity
• Up to 90% RH non-condensing

• Interface Type
• RS232, USB

• Machine Weight
• Approx 30 Kg

• Max Height
• 300 mm

• Measuring Range
• 0-300 mm

• Mounting Type
• Table Top

• Number of Specimens
• Up to 4

• Operating Voltage
• 230 V

• Port Size
• Standard

• Power Supply
• 230 V AC, 50 Hz

• Resolution
• 0.001 mm

• Response Time
• Instant

• Specimen Size
• Variable, max 300 mm length

• Temperature
• 10C to 50C

• Test Range
• 0 - 300 mm

• Test Speed
• Manual

• Test Stroke
• Suitable for 0-300 mm

• Test Width
• 50 mm

• Usage
• Calibration Lab, Metrology

• Equipment Type
• Accelerated Curing Tank

• Accuracy
• 1C (Temperature)

• Application
• Curing of Concrete Test Specimens

• Automation Grade
• Semi-Automatic

• Capacity
• 6 Cubes/12 Cubes (as per configuration)

• Color
• Silver

• Control Mode
• Temperature Controller with Digital Display

• Display Type
• Digital (LED/LCD)

• Features
• Double Walled Construction, Water Circulation, Digital Temperature Control

• Frequency
• 50 Hz

• Humidity
• Ambient

• Interface Type
• Manual/Digital Control Panel

• Machine Weight
• 90 kg (approx.)

• Max Height
• 600 mm (approx.)

• Mounting Type
• Floor Mounted

• Number of Specimens
• 6 to 12 Moulds (150 x 150 x 150 mm)

• Operating Voltage
• 230V AC

• Port Size
• Standard Outlet/Drain Fitting

• Power Supply
• 230 V AC, 50 Hz, Single Phase

• Product Type
• Accelerated Curing Tank

• Resolution
• 0.1C (Temperature Controller Display)

• Response Time
• Immediate (for Heating)

• Specimen Size
• 150 x 150 x 150 mm (Standard Cube Moulds)

• Temperature
• Ambient to 100C (adjustable)

• Test Range
• Curing Duration: 1 hour to 99 hours (Adjustable Timer)

• Usage
• Industrial

• Equipment Type
• Permeability Testing Apparatus

• Accuracy
• 1% of indicated value

• Application
• The test method is for determining the permeability to water of pozzolana mortar prepared and cured under specified conditions, by measuring the percolation of water through standard cylindrical specimens.

• Automation Grade
• Manual

• Capacity
• Accommodates three specimens at a time

• Control Mode
• Manual valve control

• Display Type
• Analog pressure gauge

• Features
• Heavy gauge powder coated body, three permeability cells, pressure gauge, water reservoir, connecting pipes, easy operation.

• Gas Pressure
• Not applicable (hydraulic pressure used)

• Hardness
• Industrial-grade materials

• Humidity
• Ambient, as per test requirements

• Interface Type
• Manual with pressure gauges

• Machine Weight
• Approx. 35 kg

• Max Height
• Approx. 350 mm

• Measuring Range
• 0 15 kg/cm

• Mounting Type
• Table mounted

• Number of Specimens
• Three specimens per test

• Port Size
• 1/4 inch BSP

• Power Supply
• Not required (manual operation)

• Product Type
• Cement Mortar Permeability Apparatus

• Resolution
• 0.1 kg/cm

• Response Time
• Immediate/manual

• Specimen Size
• Diameter: 100 mm, Height: 50 mm

• Temperature
• Ambient, typically 27C 2C

• Test Range
• 0 15 kg/cm of hydraulic pressure

• Test Speed
• Manual control, dependent on flow rate adjustment

• Usage
• Cement Testing Equipment

• Equipment Type
• Hand Operated Flow Table

• Accuracy
• As per IS: 5512/1976

• Application
• Determining flow of cement paste/mortar

• Automation Grade
• Manual

• Control Mode
• Manual lever operation

• Dimension (L*W*H)
• 150 X 360 X 270 (L X W X D) mm Millimeter (mm)

• Display Type
• Graduated scale on table

• Features
• Cast iron table with engraved lines, hand lever mechanism, conforming to standards

• Frequency
• Manual operation

• Humidity
• Ambient

• Interface Type
• Manual (hand lever)

• Machine Weight
• Approx. 15 kg

• Max Height
• 270 mm (overall)

• Measuring Range
• Up to 300 mm (table diameter)

• Mounting Type
• Table top

• Number of Specimens
• Single per test

• Power Supply
• Not required (Manual)

• Product Type
• Flow Table for Cement Hand Operated

• Resolution
• 1 mm (graduated scale)

• Response Time
• Immediate (manual)

• Specimen Size
• Standard cement paste (as per IS: 5512/1976)

• Temperature
• Ambient

• Test Range
• Standard for cement flow tests

• Test Speed
• Hand operated (manual control)

• Test Stroke
• 15 drops (standard test)

• Test Width
• 300 mm (table dia.)

• Usage
• Cement Testing Equipment

• Equipment Type
• Southard Viscometer

• Accuracy
• 2 ml

• Application
• The Southard viscosimeter shall be used for adjusting the consistency of the putty and a vessel of the shape and dimensions which shall be used for the determination of the volume yield.

• Automation Grade
• Manual

• Capacity
• Approx. 500 ml vessel

• Control Mode
• Manual

• Display Type
• None (Manual Reading)

• Features
• Robust Construction, Corrosion Resistant Vessel, Easy Cleaning

• Hardness
• Stainless Steel Vessel: 60 HRB

• Humidity
• Ambient

• Machine Weight
• 8 kg

• Max Height
• 150 mm (Approximate)

• Measuring Range
• Consistency of Putty/Cement

• Mounting Type
• Bench-top

• Number of Specimens
• Single at a time

• Operating Voltage
• None (Manual)

• Port Size
• Standard Vessel Opening

• Power Supply
• Not Required (Manual Operation)

• Product Type
• Southard Viscometer

• Resolution
• 1 ml

• Response Time
• Immediate

• Specimen Size
• Standard Putty/Cement Volume

• Temperature
• Ambient

• Test Range
• Consistency and Volume Yield of Putty/Cement

• Test Speed
• Standard (Manual Discharge)

• Test Width
• Approximately 60 mm (Vessel Diameter)

• Usage
• Cement Testing Equipment

• Equipment Type
• Lime Reactivity Test Apparatus

• Accuracy
• 1C

• Application
• Used for determining the reactivity on slaking of ground quicklime.

• Automation Grade
• Manual

• Capacity
• Approx. 500 ml flask

• Control Mode
• Manual

• Display Type
• Analog / Digital (depends on model)

• Features
• Corrosion-resistant construction, Easy to operate, Glass thermometric tube

• Frequency
• 50 Hz

• Humidity
• Ambient

• Machine Weight
• Approx. 15 kg

• Max Height
• Glass container: Approx. 250 mm

• Measuring Range
• 0 - 100C

• Mounting Type
• Bench-top

• Number of Specimens
• Single

• Operating Voltage
• 230 V

• Power Supply
• 230 V AC, 50 Hz

• Product Type
• Cement Testing Equipment`

• Resolution
• 0.1C

• Response Time
• Instantaneous

• Specimen Size
• Standard sample size as per IS: 6932

• Temperature
• Ambient to 100C

• Test Range
• 0 - 100C (Temperature rise)

• Test Speed
• Standard: N/A

• Usage
• Cement Testing Equipment

• Voltage
• 230 Volt (v)

• Equipment Type
• Funnel Viscometer

• Accuracy
• 2 seconds

• Application
• This test can be performed in the laboratory, or used in the field to assess the apparent viscosity of a clay slurry for quality control purposes.

• Automation Grade
• Manual

• Capacity
• 1000 ml (funnel + measuring jug)

• Control Mode
• Manual

• Display Type
• No electronic display; readings taken manually by stopwatch

• Features
• Lightweight, portable, easy to clean

• Hardness
• Rigid plastic body

• Humidity
• Suitable for laboratory and field environments

• Machine Weight
• Approx. 0.5 kg

• Max Height
• Approx. 350 mm

• Measuring Range
• Marsh viscosity 10-60 seconds (typical range for bentonite)

• Mounting Type
• Stand-mounted

• Number of Specimens
• Single sample per test

• Operating Voltage
• None (manual)

• Port Size
• Outlet diameter approx. 5 mm

• Power Supply
• None (gravity based)

• Product Type
• MARSH CONE FUNNEL - PLASTIC FOR BENTONITE VISCOSITY WITH MEASURING JUG

• Resolution
• 1 second

• Response Time
• Immediate upon sample pour

• Specimen Size
• 1000 ml recommended

• Temperature
• Room temperature operation

• Test Range
• Measures viscosity of bentonite slurries

• Test Speed
• Manual pour rate

• Usage
• Cement Testing Equipment

• Equipment Type
• Chemical Testing Apparatus

• Accuracy
• 0.5%

• Application
• Covers method of test for determination of carbon dioxide content of building lime.

• Automation Grade
• Manual

• Capacity
• Single test per operation

• Control Mode
• Manual

• Display Type
• Visual (Graduated burette/volume scale)

• Features
• Corrosion-resistant glassware, easy cleaning, chemical compatibility

• Gas Pressure
• Ambient

• Humidity
• Room Conditions (2080% RH)

• Interface Type
• Glass joints

• Machine Weight
• 8.5 kg

• Max Height
• 35 cm (Assembled)

• Measuring Range
• 020% CO

• Mounting Type
• Table Top

• Number of Specimens
• 1 at a time

• Operating Voltage
• N/A (manual operation)

• Port Size
• Standard Glassware fittings (Borosilicate glass joints)

• Power Supply
• Not Required (Manual Operation)

• Resolution
• 0.1%

• Response Time
• 1020 minutes (standard procedure)

• Specimen Size
• 510 g lime sample

• Temperature
• Room Temperature (2030C)

• Test Range
• 020% CO determination in lime

• Test Speed
• Manual

• Usage
• Cement Testing

• Equipment Type
• Curing Tank

• Accuracy
• 2C

• Application
• FOR CONDITIONING OF CEMENT TEST SAMPLES

• Automation Grade
• Semi-automatic

• Capacity
• Approx. 1350 Liters

• Control Mode
• Digital Temperature Control

• Dimension (L*W*H)
• Inner dimension: 1.5M X 1.5M X 0.60M Millimeter (mm)

• Display Type
• Digital Display

• Features
• Fitted with digital temperature controller, overflow and drainage facility

• Frequency
• 50 Hz

• Humidity
• 95% RH (Relative Humidity)

• Interface Type
• Simple ON/OFF Switch

• Machine Weight
• Approx. 85 kg

• Max Height
• 0.60M (Inner Height)

• Mounting Type
• Floor Mounted

• Number of Specimens
• Accommodates up to 50 cubes

• Operating Voltage
• 230V

• Port Size
• Standard Water Inlet/Outlet

• Power Supply
• 230V AC, 50 Hz

• Product Type
• Curing Tank for Cement Mortar Cubes

• Resolution
• 0.1C

• Response Time
• Instant

• Specimen Size
• 70.6mm x 70.6mm x 70.6mm

• Temperature
• Maintained at 27C 2C

• Usage
• For Cement Testing

• Equipment Type
• Le Chatelier Mould

• Accuracy
• As per IS:269, IS:4031 (Part 3), IS:9459 and EN 196 standards

• Application
• Used for determining the soundness of cement

• Automation Grade
• Manual

• Capacity
• One cement paste specimen per mould

• Control Mode
• Manual

• Dimension (L*W*H)
• 330 X 230 X 50 (L X W X D) mm Millimeter (mm)

• Display Type
• None (visual/manual measurement)

• Features
• Made of brass with clamps and two indicator needles; corrosion-resistant; rigid construction

• Hardness
• Brass hardness as per standard specification

• Humidity
• Standard laboratory conditions

• Interface Type
• Manual

• Machine Weight
• Approx. 3 kg (set of six moulds)

• Max Height
• 30 mm (mould)

• Measuring Range
• Measurement of cement expansion after boiling

• Mounting Type
• Bench-top / Table-top

• Number of Specimens
• 6 (set of six moulds)

• Product Type
• Le Chatlier Mould

• Resolution
• Standard graduation as per calibration marks

• Response Time
• Immediate upon boiling and cooling

• Specimen Size
• Internal Diameter: 30 mm; Height: 30 mm

• Temperature
• Standard laboratory ambient temperature

• Test Range
• Suitable for measuring the expansion of cement

• Usage
• Cement Testing Equipment

• Equipment Type
• Waterbath for Soundness Test of Cement

• Accuracy
• 1C

• Application
• To accommodate immersed Le-Chatelier moulds with specimens and to raise their temperature from (27 C 2 C) to boiling in (27 3 minutes).

• Automation Grade
• Semi-Automatic

• Capacity
• 6 moulds

• Control Mode
• Through Thermostat

• Dimension (L*W*H)
• 550 X 365 X 375(L X W X D) mm Millimeter (mm)

• Display Type
• Analog/Digital (Model Dependent)

• Features
• Double walled, thermostatically controlled, removable rack, stainless steel inner chamber

• Frequency
• 50 Hz

• Interface Type
• Manual

• Machine Weight
• Approx. 18 kg

• Max Height
• 375 mm (Depth)

• Measuring Range
• Ambient to boiling point

• Mounting Type
• Benchtop

• Number of Specimens
• 6 Le-Chatelier moulds

• Operating Voltage
• 230V AC

• Power Supply
• 230V AC, 50Hz

• Product Type
• Waterbath for Soundness Test of Cement

• Resolution
• 1C

• Response Time
• Within 30 minutes to reach boiling

• Specimen Size
• Standard Le-Chatelier mould

• Temperature
• Adjustable from ambient to 100C

• Usage
• Cement Testing Equipment

• Equipment Type
• Laboratory Waterbath

• Accuracy
• 1C

• Application
• Textile dyeing, Lab sample dyeing

• Automation Grade
• Semi-Automatic

• Capacity
• 6-12 dye pots (varies with model)

• Control Mode
• Manual

• Display Type
• Analog/Digital (model-dependent)

• Features
• Stainless steel chamber, uniform heating, corrosion resistant

• Frequency
• 50 Hz

• Interface Type
• On/Off switch, Temperature control knob

• Machine Weight
• Approx. 20-30 kg

• Max Height
• Approx. 400 mm

• Mounting Type
• Table Top

• Number of Specimens
• 6 to 12 dye pots at a time

• Operating Voltage
• 230V AC

• Port Size
• Standard (customizable for dye pots)

• Power Supply
• 230V AC, 50Hz

• Resolution
• 1C

• Response Time
• Rapid, within minutes

• Specimen Size
• Compatible with standard dye pots (custom options available)

• Temperature
• Ambient to 100C (adjustable)

• Usage
• Textile Laboratories, Research Institutes

• Equipment Type
• Constant Temperature Waterbath

• Accuracy
• 0.1C

• Application
• The water bath in general will fulfill the requirements of IS:4031 (Part 11) Method of Physical tests for hydraulic cement (Determination of Density)

• Automation Grade
• Semi-Automatic

• Capacity
• 8 Tests

• Control Mode
• Digital temperature controller

• Display Type
• Digital display

• Features
• Double walled construction, corrosion resistant, digital control, overtemperature protection, uniform temperature distribution

• Frequency
• 50 Hz

• Humidity
• Up to 90% RH (non-condensing)

• Machine Weight
• Approx. 18 kg

• Max Height
• Approx. 380 mm

• Mounting Type
• Table Top

• Number of Specimens
• Up to 8 Le-Chatelier apparatus or specific gravity bottles

• Operating Voltage
• 230V AC

• Power Supply
• 230V AC, 50Hz

• Product Type
• Constant Temperature Waterbath - For Specific Gravity Test Of Cement- 8 Tests

• Resolution
• 0.1C

• Response Time
• Rapid stabilization within 10 minutes

• Specimen Size
• Standard Le-Chatelier flask or specific gravity bottle

• Temperature
• 27C 2C (adjustable range 10C to 60C)

• Usage
• Cement Testing Equipment

• Equipment Type
• Shrinkage Bar Mould

• Accuracy
• Conforms to IS:4031 specifications

• Application
• For measurement of drying shrinkage. Length measuring device, reference points of 6.5mm dia and all other accessories required for the drying shrinkage test are to be purchased separately

• Automation Grade
• Manual

• Capacity
• One shrinkage bar

• Control Mode
• Manual

• Dimension (L*W*H)
• 340 X 170 X 75 (L X W X D) mm Millimeter (mm)

• Features
• Corrosion resistant, rigid construction, precise dimensions

• Hardness
• High-grade hardness for long life and durability

• Humidity
• Ambient

• Machine Weight
• Approx. 5-6 kg

• Max Height
• Approx. 75 mm

• Measuring Range
• As per standard test procedures

• Mounting Type
• Tabletop/Bench mounting

• Number of Specimens
• 1 (Single mould) or as per model

• Product Type
• Shrinkage Bar Mould

• Resolution
• Manual reading, depends on external measuring device

• Specimen Size
• Length: 250 mm, Width: 25 mm, Height: 25 mm (typically as per IS:4031)

• Temperature
• Room Temperature

• Test Range
• For drying shrinkage measurements

• Test Width
• Approx. 25 mm

• Usage
• Cement Testing Equipment

• Application
• For CEMENT HDPE BAG Tensile Strength Test

• Color
• White & Black

• Product Type
• Tensile Testing Machine

• Standard
• IS, ASTM, EN, ASHTHO, ISO

• Usage
• Industrial

• Voltage
• 230 Volt (v)

• Warranty
• 1 Year

• Equipment Type
• Curing Compound Mould

• Application
• The mould is made of stainless steel material and it is water tight as per the standard requirement.

• Automation Grade
• Manual

• Control Mode
• Manual

• Dimension (L*W*H)
• 315 X 160 X 55 (L X W X D) mm Millimeter (mm)

• Features
• Stainless steel, Water tight

• Machine Weight
• Approx. 3.8 kg

• Max Height
• 55 mm

• Number of Specimens
• 1

• Product Type
• CURING COMPOUND MOULD - SS

• Specimen Size
• 315 x 160 x 55 mm

• Test Width
• 160 mm

• Usage
• Cement Testing Equipment

• Equipment Type
• Laboratory Flask

• Application
• Used for measurement of specific gravity of hydraulic cements.

• Automation Grade
• Manual

• Capacity
• 250 ml

• Dimension (L*W*H)
• 100 X 100 X 300 (L X W X D) mm Millimeter (mm)

• Features
• Calibrated glass, clear graduation marks

• Max Height
• 300 mm

• Number of Specimens
• 1

• Product Type
• Le Chatlier Flask

• Usage
• Cement Testing Equipment

• Application
• A specially designed vibration machine is used for vibrating the mix in moulds at a frequency of 12000 400 cycles per minute, as per specifications.

• Color
• Grey

• Dimension (L*W*H)
• 380 X 890 X 640 (L X W X D) mm Millimeter (mm)

• Machine Weight
• 76 Kilograms (kg)

• Product Type
• Vibrating Machine

• Usage
• Industrial

• Weight
• 76 Kilograms (kg)

• Application
• This cone is used to find out viscosity of slurry and like material

• Dimension (L*W*H)
• 280 X 210 X 930 (L X W X D) mm Millimeter (mm)

• Features
• Good Quality

• Hardness
• Yes

• Machine Weight
• 7 Kilograms (kg)

• Power Supply
• Manual

• Product Type
• Cement Testing Equipment

• Voltage
• 220-240 Volt (v)

• Weight
• 7 Kilograms (kg)

• Application
• Industrial

• Color
• Blue

• Material
• Mild Steel

• Product Type
• MODULUS OF ELASTICITY FOR ROCK / CONCRETE

• Usage
• laboratory

• Voltage
• 220-240 Volt (v)

• Weight
• 417 Kilograms (kg)

• Application
• The instrument is specially designed to prepare cement mortar for Strength Determination.

• Dimension (L*W*H)
• 450 X 510 X 920 (L X W X D) mm Millimeter (mm)

• Product Type
• Mortar Mixer For Cement Testing

• Usage
• For Cement Testing

• Voltage
• 230 Volt (v)

• Warranty
• 1 Year

• Application
• The mould is used in determining compressive strength of cement.

• Dimension (L*W*H)
• 4x3x3 Millimeter (mm)

• Machine Weight
• 3 Kilograms (kg)

• Product Type
• Cube Mould

• Usage
• For Cement Testing

• Weight
• 3 Kilograms (kg)

• Dimension (L*W*H)
• 730 X 900 X 600 (L X W X D) mm

• Power
• 100 Watt (w)

• Power Supply
• 230 volt 50HZ, Single Phase ,Ac Supply

• Product Type
• Cement Testing

• Voltage
• 230 Volt (v)

• Warranty
• 1 Year

• Dimension (L*W*H)
• 600 X 900 X 650 (L X W X D) mm Millimeter (mm)

• Machine Weight
• 5 Kilograms (kg)

• Product Type
• Cement Testing Equipment

• Usage
• For Cement Testing Equipment

• Voltage
• 230 Volt (v)

• Weight
• 5 Kilograms (kg)

• Application
• Used to compact rectangular 40 x 40 x 160mm of port land and pozzolana cement mortar prism specimens for determining the transverse strength.

• Dimension (L*W*H)
• 1070 X 410 X 510 (L X W X D) mm Millimeter (mm)

• Machine Weight
• 40 Kilograms (kg)

• Product Type
• Vibrating Table For Cement Mortar

• Usage
• Cement Testing Equipment

• Weight
• 40 Kilograms (kg)

• Application
• The Autoclave is suitable for conducting accelerated soundness test on cements by the autoclave expansion test requiring constant steam pressure with the correspondent constant temperature.

• Machine Weight
• 98 Kilograms (kg)

• Product Type
• Cement Autoclave

• Usage
• For Cement Testing Equipment

• Voltage
• 230 Volt (v)

• Weight
• 98 Kilograms (kg)

• Application
• Variable Flow Type Air Permeability Apparatus (Blaine Type): It is used for determination of fineness of cements, pozzolanas and other powdery materials in terms of specific surface, which is expressed as total surface area in square centimeters per gram of the material under test.

• Dimension (L*W*H)
• 21 X 13 X 8 Millimeter (mm)

• Machine Weight
• 4 Kilograms (kg)

• Product Type
• Blain Air Permeability Apparatus

• Usage
• Cement Testing Equipment

• Weight
• 4 Kilograms (kg)

• Application
• For Quick Determination Of SO3 In Cement

• Power
• 100 Watt (w)

• Power Supply
• 230/240 Volts 50Hz, Single Phase Ac Supply

• Product Type
• Cement Testing Equipment

• Voltage
• 230/240 Volt (v)

• Application
• To measure length change in hardened cement paste, mortar and concrete, using a suitable micrometer.

• Dimension (L*W*H)
• 250 X 250 X 420 (L X W X D) mm Millimeter (mm)

• Product Type
• Length Comparator

• Usage
• Cement Testing Equipment

• Application
• Used to determine initial and final set times of portland cement, masonary cement, hydraulic hydrated lime and certain mortars.

• Dimension (L*W*H)
• 230 X 100 X 260 (L X W X D) mm Millimeter (mm)

• Usage
• Cement Testing Equipment