Civil Testing Instruments

UNCONFINED COMPRESSION TESTER FOR ROCK DIGITAL MOTORIZED

As per IS:9143

DIRECT SHEAR APPARATUS HAND OPERATED FOR ROCKS

The equipment is used for Direct Shear Laboratory Test of Rock Samples. The test measures peak & residual Direct Shear Strength as a function of stress normal to the sheared plane. The equipment can be used for testing Core, Lump specimens.

UNCONFINED COMPRESSION TESTER FOR ROCK SAMPLES WITH PROVING RING and DIAL GAUGE

This equipment is used for determining unconfined compressive strength of intact rock core specimens. The rock sample is cut to length and the ends are machined flat. The specimen is placed in a loading frame and if required heated to the desired test temperature. Axial load is continuously increased on the specimen unit peak load and failure are obtained.

TRIAXIAL TESTING MACHINE FOR ROCK

Detailed specification as follows: The machine comprise of three parts. 1) Automatic CTM 2000 kN 2) Constant confining pressure unit 3) Hoek Type Triaxial Cell

Solar Cell Testing Equipment

Ductility Mould

Compliance With Following National / International Standards: IS:12081978

Planetary Mixer - 20 Litres

Compliance With Following National / International Standards: ASTM D6926

DIRECT READING GSM BALANCE-GRAMMAGE TESTER

Compliance With Following National / International Standards: ASTM D3776, ASTM D5261, IS 14716

Planetary Mixer - 5 Litres

Compliance With Following National / International Standards: IS : 10890, EN 196-1 & EN 196-3, ISO 679, BS 3892 - 1, 3892-3, ASTM C109, C305

Geotextile Permeability Apparatus

Compliance With Following National / International Standards: ASTM D4491, IS 14324, EN ISO 11058

GRADIENT RATIO TEST APPARATUS

Compliance With Following National / International Standards: ASTM D5101

GEOTEXTILE APPARENT OPENING SIZE APPARATUS (DRY SIEVE TEST APPARATUS)

Compliance With Following National / International Standards: ASTM D4751, BS 6906 (Part 2), IS 14294, EN ISO 12956

Cone Drop Tester For Geosynthetic (Dynamic Perforation Tester)

Compliance With Following National / International Standards: EN ISO 13433 (2006), BS 6906 (Part 6), EN 918

Dead Weight Type Digital Thickness Gauge - 2 KPA - 0.001 X 10 mm

Compliance With Following National / International Standards: ASTM D5199, IS 13162 (Part-3), EN ISO 9863-1

COLOUR MATCHING CABINET - Model A

Compliance With Following National / International Standards: ISO 3664, BS 950, ASTM D 1729, DIN 6173

Planetary Mixer - 10 Litres

Compliance With Following National / International Standards: ASTM D6926

ABRASION RESISTANCE TESTING MACHINE FOR GEOTEXTILE

Compliance With Following National / International Standards: ISO 13427, ASTM D4886, IS 14714

Geotextile Universal Testing Machine

Compliance With Following National / International Standards: ASTM D4533, ASTM D4595, ASTM D4632, ASTM D4833, ASTM D6241, ISO 12236, ISO 10319, IS 14293.

Civil Testing Instruments

Marshal Stability Testing Machine-(4 Dia)-(With Proving Ring and Dial Gauge)

Compliance With Following National / International Standards: ASTM D6927, ASTM D1559