Send Inquiry Send SMS    Call Me Free
Home » Products » Soil Testing Equipments

Soil Testing Equipments

Our meticulously designed range of Soil Testing Equipments is used for determining physical and mechanical attributes of sand, clay and different grades of soil. These are also used for determining bedding face and joint surface features of rocky surface. Advanced software program has been incorporated into the design of these testing apparatus to perform various tests like bending test, compressive force, peeling resistance test, flexural test and tensile test at the same time. Test result can be comprehended by the changes in their testing curves. The measured test data can be accessed in Excel, PDF and Word formats. Tester section of these Soil Testing Machine is high temperature protected. The shock proof powerful servo motor and gear box of these apparatus ensure about their smooth performance.

Features:

1) All these equipments have been designed by adroit professionals to suit specific testing needs.
2) These apparatus can provide test result in PDF, Excel and word forms.
3) Heat protected design
4) Application of powerful servo motor
Rotap Sieve Shaker- With Digital Timer
close
Rotap Sieve Shaker- With Digital Timer
EIE
Sieve Shaker Carries upto 7 sieves of 200mm diameter. Supplied without sieves or Lid Pan.
Unit of Price : Piece/Pieces
Price : 46000 INR
Laboratory Cbr Apparatus - Digital
close
Laboratory Cbr Apparatus - Digital
TM-034D
Complete with Digital Display Load frame, CBR Mould made of Mild steel, Slotted and annular weight of 2.5 kg, brass perforated plate, Spacer disc, compaction hammer 2.6 kg and 4.89 kg, metal tripod stand for holding dial gauge. = 1 No. each. As per IS:2720
Laboratory Cbr Apparatus - Electric Operated With 10 kn Proving Ring
close
Laboratory Cbr Apparatus - Electric Operated With 10 kn Proving Ring
TM-034
The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet which also accommodates the motor and the electric panel. Complete with standard accessories as mentioned below. As per IS:2720 (Part XVI)
Unconfined Compression Tester-Motorised
close
Unconfined Compression Tester-Motorised
EIE
IS : 2720 (PARTX), IS : 4332 (PARTV). Supplied complete with 3 speed Load Frame, 2.5 KN or 2 KN Proving ring fitted with dial gauge with Calibration certificate, Dial Gauge of 0.01 X 25 mm travel, Coning tools for 38 mm dia specimen and one split mould for 38 mm dia specimen. Coning tools and split mould for 50 mm, 75 mm and 100 mm dia available at extra cost. NABL Calibration of Proving ring and dial gauge at extra cost.
Unconfined Compression Tester-Digital
close
Unconfined Compression Tester-Digital
EIE
Complete with 3 speed Digital Load Frame, Built in Digital Load and displacement Indicator. Other details as per the following page.
Consolidation Apparatus-Single Gang - With Dial Gauge
close
Consolidation Apparatus-Single Gang - With Dial Gauge
EIE
Compliance Standards - IS : 2720 (PART-XV) .Consists of : Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. Detailed specification as follows:
Consolidation Apparatus-Three Gang
close
Consolidation Apparatus-Three Gang
EIE
Supply Ability : 100 Per Day
Price : 36,500 INR
Consolidation Apparatus - Single gang - Electronic
close
Consolidation Apparatus - Single gang - Electronic
EIE
Consolidation Apparatus - Three Gang - Electronic
close
Consolidation Apparatus - Three Gang - Electronic
EIE
Digital Triaxial Shear Test Apparatus- For 38 mm Dia Specimen - For Cd Cc Cu Test
close
Digital Triaxial Shear Test Apparatus- For 38 mm Dia Specimen - For Cd Cc Cu Test
EIE
Relative Density Apparatus
close
Relative Density Apparatus
EIE
The equipment comprises a motorized vibratory table of size 75 mm x 75 mm, which operates on 230 Volts, single phase, A.C. Supply. Also, consists of a cylindrical mould 3000 cm3 and 15000 cm3, guide sleeve with clamp for moulds, surcharge base plate, surcharge weight for 3000 and 15000 cm3, handle for base plate, dial gauge holder, dial gauge 0.01 mm x 50 mm travel with extension piece calibration bar 75 x 300 x 3 mm
Shrinkage Limit Set With Mercury
close
Shrinkage Limit Set With Mercury
TM - 152
As per IS:2720(Part VI) and IS:10077. Complete in wooden case. with 750 gm Mercury.
Triaxial Cell
close
Triaxial Cell
EIE
As per IS:2720 (Part-XII).
Unit of Price : Piece/Pieces
Price : 30600 INR
Universal Triaxial Cell
close
Universal Triaxial Cell
EIE
For testing of cylindrical specimens of 38mm, 50mm, 75mm, and 100mm diameter with corresponding length to diameter ratio 1:2 as per IS:2720 part XII.
Unit of Price : Piece/Pieces
Price : 86000 INR
Lateral Pressure Assembly
close
Lateral Pressure Assembly
EIE
The apparatus consists of a pressure chamber which has a flanged top cap fitted with a 10Kg/Cm2. Pressure gauge and a valve for pumping in air. Water inlet and drain cock are fitted to the chamber. The foot pump supplied easily develops a pressure of 10Kg./Cm2 Complete with connecting pressure hose.
Unit of Price : Piece/Pieces
Price : 15120 INR
Constant Pressure System (Oil Water) - For Triaxial Test Apparatus
close
Constant Pressure System (Oil Water) - For Triaxial Test Apparatus
EIE
Range 0-20 bar (20 kg/Cm²), steps of pressure 0.5 bar (0.5 Kg/Cm²), Accuracy + 0.5%, Electric Supply 230 Volt, Single phase, 50 Hz, A.C Supply. Supplied complete with pressure gauge, flow valves and connecting pressure hose. The unit provides continuous variable pressure up to 0-20 kg/Cm². Pressure is increased or decreased simply by turning a control knob.
Unit of Price : Piece/Pieces
Price : 55450 INR
Direct Shear Test Apparatus
close
Direct Shear Test Apparatus
EIE-005
Product Type : Direct Shear Apparatus Motorised Model
General Use : Industrial
Automatic : Yes
Color : Blue
Warranty : Yes
Supply Ability : 100 Per Day
Price : 30000.00 INR
Compact Cbr Load Frame Three Speed ( E.O.)
close
Compact Cbr Load Frame Three Speed ( E.O.)
TM-034.1
Single speed of 1.25/min. Working on 230 Volts AC single Phase
Direct Shear Apparatus-Motorised - Single Speed - Electronic Digital
close
Direct Shear Apparatus-Motorised - Single Speed - Electronic Digital
EIE
Electronic Direct Shear Testing Machine As per IS : 2720 (PART 13) 1986 / IS : 11229 - 1985.
Permeability Apparatus For Constant And Variable Head Test
close
Permeability Apparatus For Constant And Variable Head Test
EIE
The apparatus shall be confirming to IS: 2720 (Part-XVII), IS 9198 & IS: 11209 latest edition and shall consists of following
Price : 30000 INR
Plate Bearing Test Apparatus
close
Plate Bearing Test Apparatus
EIE
As per IS:1888, ASTM D1194, D1195. The plate-bearing test gives the load deformation characteristics of soil strata for determining the bearing capacity of foundations. The set up shall comply to carry out test as per IS: 1888 which is a standard technique for determining bearing capacity of soil. In the test, a steel plate is subjected to a gradual increment of load and corresponding settlement is noted. The plate bearing test assembly shall consist of following components and requirements as mentioned in the detailed description. Without Load Truss.
Price : 132000 INR
Soil Testing Equipments
close
Soil Testing Equipments
NA
Product Type : Soil Testing Equipments
General Use : Industrial
Color : Customized
Warranty : Yes
Supply Ability : 100 Per Day
Price Range : 10000.00 - 500000.00 INR
CBR Testing Machine
close
CBR Testing Machine
EIE
Supply Ability : 100 Per Day
Price : 60,500 INR
Field Density Test Apparatus  (Sand Replacement Method)
close
Field Density Test Apparatus (Sand Replacement Method)
EIE