Send Inquiry

Request To Call Back

Cone Drop Tester

Price 1.00 INR/ Number

Get a Price/Quote

MOQ : 1 Piece

Cone Drop Tester Specification

Test Range
Variable by drop height

Mounting Type
Floor standing

Features
Robust frame, removable specimen holder, simple operation

Specimen Size
100 mm x 100 mm

Application
Mainly used to measure the puncture strength as well as the fabric quality to withstand aggregate penetration.

Measuring Range
Adjustable drop height up to 500 mm

Display Type
Scale (Manual)

Response Time
Instantaneous upon impact

Frequency
Single operation

Product Type
Cone Drop Tester FOR GEOSYNTHETIC (DYNAMIC PERFORATION TESTER)

Automation Grade
Manual

Equipment Type
Cone Drop Tester

Power Supply
Not Required (Manual)

Humidity
Max. 80% (non-condensing)

Temperature
10C to 40C

Accuracy
1 mm drop height

Max Height
500 mm

Usage
Civil Engineering Testing Equipment

Number of Specimens
Single

Resolution
1 mm

Hardness
Cone tip: Hardened steel

Machine Weight
Approx. 38 kg

Test Speed
Standard free-fall acceleration (9.81 m/s)

Test Width
100 mm

Test Stroke
Max. 500 mm

Control Mode
Manual

Cone Drop Tester Trade Information

Minimum Order Quantity
1 Piece

Supply Ability
100 Pieces Per Month

Delivery Time
4 Week

Sample Policy
Contact us for information regarding our sample policy

Packaging Details
Wooden Box / Corrugated Box

Certifications
ISO 9001 : 2015

About Cone Drop Tester

Application:

Mainly used to measure the puncture strength as well as the fabric quality to withstand aggregate penetration.

Details:

EIE Cone drop tester specifies a method to determine the resistance of Geosynthetics to penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behavior of the Geosynthetic, when sharp stones are dropped on its surface. The smaller the hole, the greater the resistance of geosynthetic OR geotextile to damage and vise versa.

The specimen is clamped between two steel rings. A steel cone is dropped from a height of 500 mm onto the center of the specimen. The degree of penetration is measured by insertion of a graduated cone into the hole. Graduated conical measure will be the part of standard supply.

Further details availableon our website.

The Price mentioned here are subject to change as per the capacity,specifications and application of the user.

Precision Impact Testing for Reliable Results

Engineered to deliver accurate and repeatable impact measurements, the Cone Drop Tester utilizes a precision vertical shaft and hardened steel cone. With adjustable drop height and 1 mm accuracy, civil engineers can confidently evaluate fabric resistance against penetration under standardized conditions.

Rugged Design and User Safety

The powder-coated steel frame and scratch-resistant finish provide lasting durability, while safety innovations such as a locking mechanism and hand guard protect operators during tests. The removable aluminium holder ensures easy specimen placement and removal, streamlining the workflow.

Manual Operation, No Power Needed

Designed for ease of use, the Cone Drop Tester operates manually, requiring no electrical power. This enables flexible deployment on-site or in laboratories, unrestricted by power availabilityideal for field testing or remote environments.

FAQs of Cone Drop Tester:

Q: How is the cone drop test performed using this equipment?

A: The test is conducted by securely placing a 100 mm x 100 mm specimen into the removable aluminium holder. The testers hardened steel cone (45 mm diameter, 1000 g) is manually released from a set height (up to 500 mm) via the precision vertical shaft, allowing it to impact the specimen with a defined energy. The drop height is measured with a manual scale, ensuring consistent results.

Q: What materials or fabrics can be evaluated using the Cone Drop Tester?

A: This tester is primarily designed for assessing the puncture strength and quality of fabric or geo-materials used in civil engineering, such as geotextiles and membranes. Its variable drop height and robust construction accommodate a range of materials requiring aggregate penetration resistance testing.

Q: When should the Cone Drop Tester be used?

A: The Cone Drop Tester is ideal for use both in laboratory environments and on construction sites, especially when evaluating new materials or verifying quality standards before installation. Use it when material performance against puncture or penetration by aggregates needs verification.

Q: Where is the Cone Drop Tester typically installed or used?

A: This floor-standing unit is suitable for civil engineering testing laboratories, research institutions, or directly on-site at construction locations where fabric quality or performance must be assessed. Its manual operation means no dependency on external power sources.

Q: What is the process for adjusting the test parameters?

A: Users can manually set the drop height up to 500 mm with 1 mm resolution using the vertical scale. The single specimen holder is designed for rapid loading and unloading, while the cone mass and diameter remain fixed for standardized testing.

Q: How does the Cone Drop Tester enhance safety during operation?

A: The integrated safety locking mechanism prevents accidental drop triggering during specimen placement. Additionally, the hand guard keeps operators hands away from the impact zone, reducing the risk of injury during each test cycle.

Q: What are the benefits of using a manual Cone Drop Tester?

A: Manual operation offers unmatched simplicity and reliability, with no need for electrical power. The sturdy construction, precise measurement capabilities, and straightforward specimen handling make it a cost-effective and dependable tool for civil engineering applications.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

More Products in Civil Testing Instruments Category

TRIAXIAL TESTING MACHINE FOR ROCK

Price 1.00 INR / Piece

Minimum Order Quantity : 1 Piece

Features : Sturdy frame, Userfriendly controls, Precision loading

Application : Rock Triaxial Compression Testing

Usage : Rock Testing Equipment

Machine Weight : 765 Kilograms (kg)

Get a Price/Quote

ABRASION RESISTANCE TESTING MACHINE FOR GEOTEXTILE

Price 1.00 INR / Piece

Minimum Order Quantity : 1 Piece

Features : Robust construction, adjustable test parameters, digital counter

Application : Geotextile Abrasion Resistance Tester is used to determine the resistance of geotextile or geotextilerelated products to abrasion using an abrasion tester by Sand Paper/Sliding Block Method

Usage : Civil Engineering Testing Equipment

Machine Weight : 6 0.01 Kilograms (kg)

Get a Price/Quote

Geotextile Permeability Apparatus

Price 1.00 INR / Piece

Minimum Order Quantity : 1 Piece

Features : Stainless steel body, Leakproof design, Userfriendly digital controls

Application : These test methods cover procedures for determining the hydraulic conductivity (water permeability) of GeoTextiles in terms of permittivity under standard testing conditions, in the uncompressed state.

Usage : Civil Testing Instruments

Machine Weight : Approx. 180 kg

Get a Price/Quote

GRADIENT RATIO TEST APPARATUS

Price 1.00 INR / Piece

Minimum Order Quantity : 1 Piece

Features : Corrosionresistant sample holder, Leakproof assembly, Easy clamp system

Application : This test method covers a performance test applicable for determining the SoilGeotextile system permeability and clogging behavior under unidirectional flow conditions.

Usage : Geotextile & Soil Permeability Test

Machine Weight : Approx. 24 kg

Get a Price/Quote