Call UsCall Us : +919824041391
DETERMINATION OF RESISTANCE TO THERMAL SHOCK

DETERMINATION OF RESISTANCE TO THERMAL SHOCK

672000 INR/Piece

Product Details:

  • Voltage 230 Volt (v)
  • Color Silver
  • Product Type DETERMINATION OF RESISTANCE TO THERMAL SHOCK
  • Usage Industrial
  • Application Determination of resistance to thermal shock of a whole tile by cycling 10 times between the temperatures of cold water and a temperature just above that of boiling water. Usually tests are carried out between 15 C and 145 C.
  • Power 100 Watt (w)
  • Power Supply 230 Volts, 50 Hz, Single Phase, Ac Supply
  • Click to View more
X

DETERMINATION OF RESISTANCE TO THERMAL SHOCK Price And Quantity

  • 1 Piece
  • 672000 INR/Piece

DETERMINATION OF RESISTANCE TO THERMAL SHOCK Product Specifications

  • Determination of resistance to thermal shock of a whole tile by cycling 10 times between the temperatures of cold water and a temperature just above that of boiling water. Usually tests are carried out between 15 C and 145 C.
  • 230 Volts, 50 Hz, Single Phase, Ac Supply
  • 100 Watt (w)
  • Silver
  • 230 Volt (v)
  • DETERMINATION OF RESISTANCE TO THERMAL SHOCK
  • Industrial

DETERMINATION OF RESISTANCE TO THERMAL SHOCK Trade Information

  • Ahmedabad
  • 100 Piece Per Month
  • 4 Week
  • Contact us for information regarding our sample policy
  • Wooden Box / Corrugated Box
  • All India
  • ISO 9001 : 2015

Product Description

Principle

Determination of resistance to thermal shock of a whole tile by cycling 10 times between the temperatures of cold water and a temperature just above that of boiling water. Usually tests are carried out between 15 Degree Celsius and 145 Degree Celsius.


Also accommodates various tile size such as : 600 x 600 MM, 1000 x 1000 MM, 1200 x 1200 MM, and 800 x 1200 MM


Salient features

  • The machine is capable to test sample up to 1200 X 1200 mm.
  • This low temperature bath is designed to match
  • Capable to maintaining the temperature 
  • This water bath is ideal for both the tests 1) Testing with immersion and 2)Testing without immersion.
  • There are two separate chambers for Testing with and without immersion.
  • In case of all tiles having water absorption not greater than 10 percent, the bath is not covered and is of sufficient depth to allow the tiles to be placed vertically and immersed completely.
  • In case of glazed tiles having water absorption greater than 10 percent, the bath is covered with a 5 mm thick aluminum plate in such a manner that the water directed towards the surface, remains in contact with the plate.
  • Covering the aluminum plate is a layer of aluminum grains approximately 5 mm thick with diameter in the range of 0.3 mm to 0.6 mm.
  • The water flow rate for both water bath will be 4 liter per min.
  • The temperature will be controlled with the PID Controller.



Further details availableon our website.

The Price mentioned here are subject to change as per the capacity,specifications and application of the user. 

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Tiles and Ceramic Testing Equipments' category