Deep Abrasion Machine For Unglazed Tiles

Product Description

Operating Principle:

The ability of unglazed tiles to resist deep abrasion is determined by holding the tile under test in a vertical plane and pressing it against a steel disc rotating at a specified speed. The abrasive material of specified grit size is dropped from a funnel at fixed rate so as to fall between the face of the tile under test and the steel disc. The length of impression produced on the surface of the tile under test is measured. The volume of material abraded away from the tile is calculated to evaluate resistance to deep abrasion of the tile under test.

Construction details:

The Resistance to Deep Abrasion Tester for unglazed tiles consists of following parts and accessories.

1) A metal disc held with its axis lying in a horizontal plane

2) A motorized arrangement to rotate the disc, 

3) A pre set type electronic counter to record the number of rotations of the disc and also to automatically stop the motor after a preset number of rotations

4) A frame to hold the test specimen in a vertical plane tangential to the circumference of the metal disc

5) A trolley on which the test specimen holder is mounted and 

6) Dead weights to pull the trolley to press the test specimen against the metal disc.

Furtherdetails available on our website.

The Price mentioned here are subject to change as per the capacity,specifications and application of the user.